MacBook won't charge? What to check before you book a repair
4 November 2026 · Mac news
A MacBook that won't charge is worrying, particularly when the battery percentage is falling and your work is on it. The cause can be as simple as a worn cable, or it can be a fault inside the Mac. These checks take a few minutes, cost nothing, and tell you a lot about what is wrong.
Start with the simple checks
- Try another wall socket. Plug the charger straight into the wall, not into an extension lead or a monitor.
- Inspect the charger and cable. Look for fraying, kinks or bent connectors. Cables fail far more often than Macs do.
- Try a known-good charger. If you can borrow one with the right power rating for your MacBook, this is the most useful test of all. A low-powered phone charger may not charge a MacBook properly.
- Try the other ports. If your MacBook has more than one USB-C port, try each of them. If you use MagSafe, check that the connector is clean and sits firmly in place.
- Look inside the port. Use a torch. Lint can stop a connector seating properly. Don't poke around with anything metal.
- Leave it plugged in. A completely flat battery can take a while to show any sign of life, so give it at least 30 minutes.
Check it isn't just a setting
If your Mac is plugged in and says it isn't charging, it may be doing this on purpose. Optimised Battery Charging can pause charging at around 80% to reduce battery wear, which is normal. Open System Settings, choose Battery, and check the charging options. You can see the battery's condition there too. If it says service is recommended, the battery is probably due for replacement.
Restart it properly
Shut the Mac down fully, wait 30 seconds and start it again. On older Intel MacBooks, resetting the SMC, the chip that manages power, can also help. Apple's support site has the steps for each model.
Signs it needs a repair
- It doesn't charge with a known-good charger on any port. The fault is likely to be the battery, the charging port or the charging circuit on the logic board.
- It charges on one port but not another. This often points to a damaged port or a fault on the board.
- It only works while plugged in, or the percentage jumps around or suddenly falls. The battery is often the cause.
- The trackpad is lifting, or the case is bulging. A swollen battery can be dangerous. Stop using the Mac, unplug it and have it looked at straight away.
- It has had a spill, even weeks ago. Corrosion can spread slowly and damage charging circuits. See liquid damage repair.
Back up while you still can
If the Mac is still running on battery, use that time to back up your important files before it shuts down. On recent Macs the storage is soldered to the logic board, so a charging fault can mean losing access to your files until the Mac is repaired. If it has already died and there is no backup, don't panic: a chip-level repair keeps the original board, which can often bring your files back. See Mac data recovery.
Charging repairs in London
We repair MacBook Pro and MacBook Air charging faults in our workshop near London Bridge, including batteries, ports and logic board charging circuits. Bring your charger with you so that we can test it too. We start with a full diagnosis and confirm the price before any work starts. All repairs come with a 90-day parts and labour warranty.
Get a quote
Call 020 7394 2525, or fill in the enquiry form. Bring your Mac to 80 Willow Walk, London SE1 5SY, or use our bike and courier collection. We are open 9am to 6pm, Monday to Saturday.
