MacBook Touch ID not working? What to check
18 November 2026 · Mac guides
Touch ID is one of those features you only notice when it stops working. Suddenly your MacBook wants your password every time, Apple Pay will not confirm, or the sensor simply does not respond to your finger. The good news is that most Touch ID problems are caused by something simple, and you can rule those out at home in a few minutes. This guide covers the checks to try, what is normal behaviour, and the signs that point to a hardware fault.
First: is it actually a fault?
macOS asks for your password instead of your fingerprint in certain situations on purpose. This is a security feature, not a fault. You will need to type your password:
- after you restart or switch on your Mac;
- after five failed fingerprint attempts in a row;
- if you have not unlocked the Mac with your password for around 48 hours;
- when you add or remove fingerprints, or change some Touch ID and password settings.
So if Touch ID worked yesterday and today the Mac wants your password once after a restart, that is expected. Type it in and try your finger again next time you lock the screen.
Simple checks to try
Clean and dry the sensor and your finger
The sensor is the top-right key on the keyboard, which is also the power button. Grease, hand cream, moisture or dust stop it reading your fingerprint properly. Wipe it gently with a soft, lint-free cloth, very slightly dampened with water if needed, and make sure your finger is clean and dry. Wet, cold or very dry skin, cuts and plasters all cause failures, which is why Touch ID can seem worse in winter or after washing up.
Rest your finger, do not press
Touch ID reads your finger when it rests lightly on the sensor. Pressing hard can switch the screen off or start the shutdown prompt, as the sensor is also the power button. Cover the whole sensor with the pad of your finger and keep it still for a moment.
Check Touch ID settings
Open System Settings and choose Touch ID & Password. Check that your fingerprints are listed, and that the switches for unlocking your Mac, Apple Pay and password autofill are turned on for what you want to use. Each user account can have up to three fingerprints, and the Mac can store up to five in total across all accounts.
Delete and re-add the fingerprint
If one finger keeps failing, remove it and enrol it again. Hover over the fingerprint in Touch ID & Password, click the delete button, then choose Add Fingerprint and follow the prompts. Lift and rest your finger many times, and when asked, use the edges of your fingertip as well as the centre.
Restart and update
A full restart clears temporary glitches with the background processes that handle Touch ID. While you are at it, check for macOS updates in System Settings under General, then Software Update, as Touch ID problems are sometimes fixed in an update.
If you use a separate keyboard with Touch ID
Apple's Magic Keyboard with Touch ID works only with Apple silicon Macs. If its Touch ID stops working, connect it to your Mac with its cable for a moment so it pairs again, make sure it is charged, and check that it appears in Bluetooth settings. If the keyboard's sensor fails but the MacBook's own sensor works, the fault is with the keyboard, not the Mac.
Signs of a hardware fault
If none of the checks above help, the fault may be with the sensor or its connection. Signs to look out for include:
- the Touch ID & Password section is missing, greyed out or will not let you add a fingerprint;
- enrolling a fingerprint fails every time, even with a clean finger;
- Touch ID stopped working after a drop, a spill or a previous repair;
- the power button also feels sticky, loose or stops switching the Mac on.
A spill is a common cause. Liquid can reach the sensor and its flex cable, and the same spill can affect the keyboard and logic board beneath it. If you have spilled anything recently, even a small amount, read our advice on Mac liquid damage repair before using the Mac much more.
Why Touch ID repairs need care
The Touch ID sensor is securely linked to the chip in your Mac that stores fingerprint data, known as the Secure Enclave. That link is what keeps your fingerprints safe, but it also means a sensor cannot simply be swapped for another one and expected to work. On many MacBooks the sensor is built into the keyboard area, so a keyboard or top case replacement must be done in a way that keeps Touch ID paired.
This is why it pays to find out exactly what has failed before anything is replaced. Sometimes the problem is a damaged flex cable or connector rather than the sensor itself, which can be repaired while keeping the original, paired sensor. Our keyboard replacement page explains more about keyboard and top case work, and our full diagnostics will pinpoint the fault before you decide.
Can I keep using my Mac without Touch ID?
Yes. Touch ID is a convenience. Your Mac works normally with your password, and you can still use Apple Pay on your iPhone or Apple Watch. As long as the power button still works, there is no urgency, but it is worth getting it checked if the fault started after a drop or spill.
Get a quote
If Touch ID on your MacBook still will not work after these checks, call us on 020 7394 2525 or visit us at 80 Willow Walk, London SE1 5SY, 9am to 6pm Monday to Saturday. We offer bike collection in London and courier collection across the UK.
