iMac screen dim or very dark? What to check
22 November 2026 · Mac guides
Your iMac turns on, you can hear it start up, but the screen looks dull, grey or so dark you can barely make anything out. Sometimes it happens gradually, sometimes all at once after an update or a power cut. A dim iMac screen can be anything from a single setting to a failed backlight, and the checks below will help you tell which, without opening anything up.
Start with the brightness controls
It sounds obvious, but it catches people out, especially when someone else uses the same iMac or a new keyboard has been connected.
- Brightness keys: on an Apple keyboard, the brightness keys are usually F1 (down) and F2 (up). Press F2 several times. On some keyboards you need to hold the Fn key at the same time.
- Displays settings: open System Settings, then Displays, and drag the brightness slider all the way up. On older versions of macOS this is in System Preferences.
- Automatic brightness: in the same place, turn off "Automatically adjust brightness" for now. If the light sensor is covered by a sticker, a webcam cover or dust, the iMac can think the room is dark and turn itself down.
Settings that make a screen look dim
If the brightness is already at full and the screen still looks wrong, a few other settings can make it seem darker or warmer than it should be.
- Night Shift: gives the screen an orange tint, often on a schedule in the evening. Find it under Displays.
- True Tone: adjusts colour to the room's lighting, which can look dull in some rooms. Try turning it off.
- Reduce white point: in Accessibility, then Display, this option lowers the intensity of bright colours. If it is turned on, the whole screen looks grey and flat.
- Third-party apps: screen-tint and dimming utilities can override the normal settings. Quit any you have installed and check again.
Rule out software
If the screen became dim straight after an update or a new app, start the iMac in safe mode. On an Apple silicon iMac, shut it down, then press and hold the power button until you see the startup options, select your startup disk, hold Shift and choose to continue in safe mode. On an Intel iMac, hold Shift as soon as it starts up until you see the login window. If the brightness is normal in safe mode, something you have installed is the likely cause. On an Intel iMac, resetting NVRAM can also help with display settings that will not stick: shut down, then turn on while holding Option, Command, P and R together for about 20 seconds.
The torch test
This is the most useful check of all. Turn the room lights down, put something on the screen with plenty of white, such as an empty document, and shine a torch at the glass at an angle, close up.
- You can faintly see the desktop, icons or text: the iMac is producing a picture, but the backlight behind the panel is not lighting it. This points to a backlight, display cable or power fault, not to the graphics.
- You see nothing at all, even with the torch: the problem is more likely the graphics, the logic board or the iMac not starting properly. Our guide to an iMac that will not turn on is a better starting point.
- The picture is bright in some areas and dark in others: part of the backlight has failed, or the panel itself is damaged.
What the hardware faults usually are
When the settings are fine and the torch test shows a faint picture, the cause is inside the iMac. The common ones are:
- Backlight failure. The LEDs that light the panel, or the circuit that powers them, stop working. It may start with flickering or the screen going dark a few minutes after start-up, before failing for good.
- A loose or damaged display cable. More likely if the iMac has been moved, knocked or had work done on it.
- A power supply problem. A failing power supply can leave enough power to run the iMac but not the backlight.
- A logic board fault. Sometimes the part that controls the backlight is on the main board itself.
Please do not try to open the iMac yourself. The screen is glued to the case, the glass breaks easily, and the power supply inside can hold a dangerous charge for a while after the iMac is unplugged.
Keep your files safe
A dim screen does not usually put your files at risk on its own, but it makes the iMac hard to use, and a fault can get worse. If you can still see enough to work, back up with Time Machine to an external drive now. If you cannot see well enough, you may be able to plug in an external monitor to get the backup done, or ask us to make sure your data is safe before any repair.
Repair or replace?
A failed backlight or display cable does not mean the iMac is finished. Many are repaired by fixing the specific fault rather than replacing the whole screen, and that is often much better value. On a very old iMac that no longer gets macOS updates, a repair can still make sense if it does everything you need, but it is worth weighing up. A full diagnostic check tells you exactly what has failed before you decide. You can read more about our iMac repair service and Mac screen repairs.
Get a quote
If your iMac screen is still dim or dark, call us on 020 7394 2525 between 9am and 6pm, Monday to Saturday, or send us the details online. We are at 80 Willow Walk, London SE1 5SY, collect by bike in London and arrange couriers from anywhere in the UK.
