iPad not charging? What to check first
22 November 2026 · Mac guides
You plug your iPad in, and nothing happens. Or the battery icon shows a lightning bolt but the percentage hardly moves, or the status bar says "Not Charging". It is a common problem, and it is often caused by the cable, the plug or something in the port rather than the iPad itself. Work through the checks below in order. They are all safe to try at home, and they will usually tell you whether you need a repair.
First, what is the iPad actually telling you?
Look closely at the battery icon at the top right of the screen.
- No lightning bolt at all: the iPad is not detecting power. Think cable, adapter, socket or port.
- "Not Charging" next to the battery: the iPad sees the power source, but it is not supplying enough to charge. This is normal when it is plugged into many computer USB ports or a weak travel charger.
- Charging, but very slowly: usually a low-power adapter, a worn cable, or the iPad being used heavily while it charges.
- A dead screen that shows nothing when plugged in: the battery may be completely flat. Leave it on a known good wall charger for at least 30 minutes before deciding it is dead.
Check the plug, cable and socket
Most charging faults are found here, so start with them before worrying about the iPad.
- Use a wall adapter, not a laptop. Plug into a mains wall socket using the adapter that came with the iPad, or a good-quality USB-C adapter of similar or higher wattage. Phone chargers, car chargers and many hubs simply cannot keep up with a tablet.
- Try another cable. Cables fail inside long before they look damaged, especially at the ends where they bend. If a different cable works, you have found the problem.
- Try another socket. Extension leads and multi-way adapters can fail too. Test the charger with another device if you have one.
- Remove the case. Thick or rugged cases can stop the plug from going all the way in, so it touches but does not make a proper connection.
Look inside the charging port
Pocket fluff, crumbs and dust get packed into the port over time, especially if the iPad travels in a bag. A plug that feels loose or will not click fully home is a strong hint.
Turn the iPad off and shine a torch into the port. If you can see debris, gently ease it out with a wooden toothpick or a soft, dry brush. Do not use anything metal, do not poke at the contacts, and do not blow into the port, since moisture from your breath does not help. Never use compressed air at close range or any liquid cleaner. If the debris is packed in hard or the port looks damaged or corroded, stop and let a technician clear it.
Restart the iPad
Sometimes the charging is fine but the software has stopped reporting it properly. A forced restart clears this and does not erase anything.
- iPad without a Home button: press and quickly release the volume button nearest the top button, then the other volume button, then hold the top button until the Apple logo appears.
- iPad with a Home button: hold the Home button and the top button together until the Apple logo appears.
Then plug it back into a wall charger and leave it alone for a while. It is also worth installing any pending iPadOS update once it has some charge.
Settings that make charging look stuck
Recent iPads include features that protect the battery by holding the charge at a lower level. On some models you will find these under Settings, then Battery. If your iPad stops at 80% every time, check whether a charging limit or optimised charging is turned on before assuming there is a fault. This is deliberate, and it helps the battery last longer.
Temperature matters
An iPad may slow down or pause charging if it gets too hot or too cold, for example on a sunny windowsill, in a car, or straight after a long gaming or video session. Let it cool down or warm up to room temperature, take it out of its case, and try again.
Signs it is a hardware fault
If you have tried a known good wall adapter and cable, cleaned the port and restarted, and it still will not charge properly, the fault is probably inside. The usual causes are:
- A worn or damaged charging port. The plug wobbles, it only charges at a certain angle, or it connects and disconnects as you move it.
- A tired battery. The iPad charges but the battery percentage drops fast, jumps around, or the iPad switches off well before reaching zero.
- Liquid damage. Even a small spill can corrode the port or the charging circuit, sometimes weeks later.
- A board-level fault. After a drop or a bad charger, the charging circuit itself can fail.
Stop using the iPad and do not charge it overnight if the screen is lifting away from the frame, the case looks bent, the iPad gets unusually hot while charging, or you notice a burning or chemical smell. These can be signs of a swollen battery.
Keep your files safe
If the iPad still turns on, make sure it is backed up to iCloud or a computer while it has some charge. Photos and notes that only live on the iPad are the thing you cannot replace. If it has stopped turning on altogether and you have not backed up, tell the repairer before any work is done, so the aim is to get it working again rather than swap it for a new one.
Repair or replace?
A charging port or battery replacement is often well worth doing on a newer iPad, and it means you keep everything just as it was. On a much older model that no longer gets iPadOS updates, the sums can come out differently, and an honest repairer should say so. Our iPad repair service starts by finding out exactly what is wrong, so you can decide with the facts in front of you. If you are in London, our bike collection service saves you a trip.
Get a quote
If your iPad still will not charge, call us on 020 7394 2525 between 9am and 6pm, Monday to Saturday, or send us the details. We are at 80 Willow Walk, London SE1 5SY, collect by bike in London and can arrange a courier from anywhere in the UK.
