Apple Pencil not working with your iPad? What to check
18 November 2026 · Mac guides
When an Apple Pencil stops working, it is easy to assume the Pencil has died. Often it has not. The cause is frequently a flat battery, a lost Bluetooth pairing, a worn tip, a case in the way, or even a Pencil that does not suit that iPad. Less often, the fault is in the iPad itself. This guide takes you through the checks in a sensible order so you can work out which it is before spending money.
Check the Pencil and iPad go together
Apple has made several Pencils over the years, and each one works only with certain iPads. A Pencil that worked with your old iPad may not work at all with a new one, even if it looks as if it should. The main models are:
- Apple Pencil (1st generation): round with a removable cap, pairs and charges through a Lightning connector or an adapter.
- Apple Pencil (2nd generation): one flat side, attaches magnetically to the side of compatible iPads to pair and charge.
- Apple Pencil (USB-C): has a sliding cap hiding a USB-C port, pairs and charges with a cable.
- Apple Pencil Pro: attaches magnetically to the side of newer compatible iPads, and adds features such as squeeze.
Apple's support site has a page listing which Pencil works with which iPad. If you are not sure which iPad you have, open Settings, then General, then About, and look at the Model Name. It is worth checking this first, especially after a new iPad or a second-hand Pencil.
Charge it properly
A completely flat Pencil will not pair or draw, and one that has sat in a drawer for months may need a while on charge before it responds. Charge it in the way that suits the model: plugged in for the 1st generation and USB-C Pencils, or attached to the magnetic connector on the side of the iPad for the 2nd generation and Pro. Leave it for at least 15 to 20 minutes before you test it.
To see the Pencil's charge level, add the Batteries widget to your Home Screen or Today View. If the Pencil never shows up there, it is not connected.
Check Bluetooth and pair again
Every Apple Pencil uses Bluetooth to talk to the iPad. Open Settings, then Bluetooth, and check that Bluetooth is turned on. If your Pencil is listed under My Devices but shows as not connected, tap the info button next to it and choose Forget This Device. Then pair it again:
- for a magnetic Pencil, attach it to the side of the iPad and tap Connect or Pair if asked;
- for a 1st generation or USB-C Pencil, connect it to the iPad with the right connector or cable and tap Pair.
A restart of the iPad before pairing again clears many stubborn connection problems.
Remove the case
Thick cases and some keyboard covers sit between a magnetic Pencil and the iPad's charging connector. The Pencil may seem to stick to the iPad but not charge or pair. Take the case off and attach the Pencil directly to the iPad to test. If it works without the case, the case is the problem.
Check the tip
The tip wears down with use, especially on a matte screen protector. A worn tip can feel scratchy, skip lines or stop registering, and you may see the metal inside showing through. The tip unscrews, so first check it is screwed on firmly, as a loose tip causes patchy lines. If it is worn, fit a new one. Only use tips meant for Apple Pencil, as a poor fit can damage the Pencil's thread.
Is it the Pencil or the iPad?
If the Pencil is charged, paired and has a good tip but still does not draw, the next step is to find out which device has the fault. A few clues help:
- Your finger does not work properly either. If parts of the screen also ignore your finger or register touches by themselves, the fault is likely in the iPad's screen. Our Mac guides include one on an iPad touchscreen that is not responding.
- The Pencil works on another iPad. If you can try it on a friend's compatible iPad and it works there, the Pencil is fine and the problem is with your iPad.
- A magnetic Pencil will not charge on any side. If a known good Pencil will not charge or pair when attached to your iPad, the iPad's magnetic charging connector may be faulty.
- The Pencil only fails in one area of the screen. A dead strip or patch where the Pencil will not draw usually means a screen fault, often after a drop or a bend.
When the Pencil itself has failed
Apple Pencils contain a small sealed battery that wears out over the years, so an older Pencil may charge but go flat very quickly, or stop charging altogether. Pencils are not designed to be opened, so if the Pencil itself has failed, the usual answer is a replacement Pencil. Before you buy one, make sure the iPad is not the real cause, or a new Pencil will not help.
When the iPad needs a repair
If the tests point to the iPad, the common causes are damage to the screen's touch layer, a fault with the magnetic charging connector or its cable, or liquid damage. Drops and bends are frequent culprits, particularly on thinner iPads carried in a bag. Our iPad repairs page explains what we repair and how to book. You can also contact us to describe the fault first.
Before any repair, back up your iPad to iCloud or to a computer, and make sure you know your Apple Account password. If your iPad holds work, drawings or notes that only exist on it, a backup is the first thing to do.
Get a quote
If your Apple Pencil still will not work with your iPad after these checks, call us on 020 7394 2525 or visit us at 80 Willow Walk, London SE1 5SY, 9am to 6pm Monday to Saturday. We offer bike collection in London and courier collection across the UK.
